ÌìÃÀÓ°Ôº

The Windsor Framework arrangements include freight and business-to-business parcels.  Your UK Internal Market Scheme (UKIMS) authorisation allows you to benefit from the simplified processes for Internal Market Movements.

As part of this you can use Internal Market Movement Information (IMMI) to move your goods. IMMI requires less information compared to a full declaration, while ensuring that no customs duty is charged.  If you’re sending parcels from a business in Great Britain to a consumer in Northern Ireland, you won’t need to submit a declaration and do not need to be registered in any scheme.ÌýThis document gives you more information about how you can use the Internal Market Movement Information.Ìý

1. When you can use the IMMI

You can use the IMMI to move goods if they: 

• are ‘not at risk’ of entering the European Union (EU) under UKIMSÌýÌý
• are Standard or Category 2 goodsÌýÌý
• are in free circulation in Great Britain and moving into free circulation in Northern Ireland
• move by direct transport from Great Britain to Northern Ireland – this includes goods moved under transit that pass through countries in the Common Transit Convention 

2. When you can’t use the IMMIÌýÌý

You’ll need to submit a full declaration if any of the following exclusions apply. This applies when: 

• the goods are not being directly transported from Great Britain to Northern IrelandÌýÌý
• you are not authorised for UKIMSÌýÌý
• you’re claiming relief from customs duty on your goods on entry to free circulation into Northern IrelandÌýÌý
• your goods are being entered into any special procedure upon arrival in Northern Ireland – however they can still be entered into an excise warehouse using the IMMIÌýÌý
• you are moving Category 1 goods 

3. How to submit the IMMI ÌýÌý

You should use customs declaration software to submit your IMMI. Your customs intermediary must use customs declaration software if they’re submitting it on your behalf.Ìý

4. When to submit the IMMIÌýÌý

You can submit the IMMI either pre-movement, or post-movement using the ‘Entry in Declarant’s Records (EIDR) process’. If you’ve used the simplified frontier declaration process, you may be able to use the IMMI to complete your supplementary declaration.ÌýÌý

If you’re submitting the IMMI pre-movement you will need to do this before the goods board either: 

• a vessel or train departing for locations in Northern Ireland that use the Goods Vehicle Movement Service (GVMS)ÌýÌý
• a vessel departing for a location that needs you to submit an import declaration before your goods depart for Northern Ireland  

Provided you hold a UKIMS authorisation, you have the following options for submitting the IMMI ±è´Ç²õ³Ù-³¾´Ç±¹±ð³¾±ð²Ô³Ù:Ìý

• following an initial movement using your own Simplified Customs Declaration Procedures (SCDP) EIDR authorisationÌýÌý
• following an initial movement using, with permission, an intermediary’s SCDP-EIDR authorisation, with post-movement information completed using the IMMIÌýÌý
• following an initial movement using the UKIMS-EIDR ²¹³Ü³Ù³ó´Ç°ù¾±²õ²¹³Ù¾±´Ç²ÔÌý

5. Information required when submitting the IMMI post-movementÌýÌý

The information in Annex 1 sets out new simplified processes available to businesses that have existing SCDP or EIDR authorisations, or access to an intermediary with a relevant authorisation.ÌýÌýBelow is a summary of the information you will require when submitting the IMMI post-movement.

Details of those involved in the movement include: 

• the EORI number associated with your UKIMS authorisationÌýÌý
• your UKIMS authorisation numberÌýÌý
• details about the exporter and importer (such as their EORI number or full name and address)ÌýÌý
• information about the intermediary (if you are using one) 

6. Information about the goods being moved include: 

• a description of the goodsÌýÌý
• the commodity code of the goods – you can check this using the Online Tariff tool (OTT) and it can also be pre-populated using the Trader Goods Profile (TGP)ÌýÌý
• the value and quantity of the goodsÌýÌý
• the country of origin of the goodsÌýÌý
• the goods category under the Windsor Framework 

Information about how the goods are being moved include: 

• where the goods are being moved to and fromÌýÌý
• the mode of transport for moving the goodsÌýÌý
• the number of packages in the consignment 

 Information about the customs procedures includes the customs procedure being used.ÌýÌýYou may also need: 

• certificates and licences if your goods are Category 2 goodsÌýÌý
• your Northern Ireland Retail Movement Scheme (NIRMS) reference number in DE2/3, if you are moving goods under that scheme  

If you use the Trader Goods Profile, you will also be able to include your Northern Ireland Plant Health Label (NIPHL) reference number.Ìý

7. Categories of goods and completing your IMMIÌýÌý

There are three categories of goods: Standard, Category 2 and Category 1. You can use the IMMI for Standard goods and Category 2 goods.ÌýÌý

7.1 Standard goods

This includes agri-food goods that move under the Northern Ireland Retail Movement Scheme (NIRMS), can be declared using a 6-digit commodity code.Ìý

Category 2

This excise products and goods subject to EU Import Controls, you’ll need an 8-digit commodity code and must declare your licence or certificate on the IMMI to release them.Ìý

Category 1

Category 1 goods cannot be moved under UKIMS and therefore are excluded from the IMMI. This means goods that are subject to: 

• restrictions enforced by Article 215 of The Treaty on the Functioning of the European Union (TFEU)  
• total bans or prohibitions  
• trade defence measures  
• EU tariff quotas claimed by an importer  
• EU quotas (not including tariff rate quotas)

You can use the   to check the category of your goods or read further guidance on how to categorise your goods.

8. Trader Goods Profile  

All UKIMS traders will be provided with a TGP, a unique record populated with the goods that you regularly move from Great Britain to NI. Instead of providing commodity codes to the Trader Support Service or an agent for each movement, the TGP will pre-populate certain data elements in the IMMI. You will only need to provide a product reference or simple goods description alongside standard commercial information.ÌýÌý

HMRC will be able to pre-populate some of your TGP based on our records of goods you already move to Northern Ireland. You can access your Trader Goods Profile through ÌìÃÀÓ°Ôº

9. More information and support ÌýÌý

For support, you can call our Customs and International Trade helpline on 0300‌‌‌ 322‌‌‌ 9434 (textphone‌‌‌ 0300‌‌‌ 200‌‌‌ 3719) or the .Ìý

10. Annex 1: Other simplified process datasetsÌýÌý

New simplified processes versions of existing datasets are available for those businesses that have existing Simplified Declaration Process (SDP) or EIDR authorisations to make use of the reduced IMMI dataset.Ìý

10.1 I1 C and F Standard and Controlled datasetÌýÌý

Purpose: A reduced dataset available for simplified processes as an Arrived (C), Pre-Lodged (F) declaration for traders with SDP authorisation. Trader can submit a C or F declaration followed by an IMMI as a supplementary declaration.Ìý

Requirements are: 

• trader must be UKIMS and SCDP authorisedÌýÌý
• goods must be in free circulation and home use prior to their movementÌýÌý
• goods must be directly transported into Northern IrelandÌýÌý
• goods must be ‘not at risk’ of onward movement to the EUÌýÌý
• goods must be released to free circulation in Northern Ireland 

 Benefits are: 

• traders can declare the IMMI as a supplementary declarationÌýÌý
• I1 C and F for simplified processes is smaller than I1 C and F in full customs processesÌýÌý
• no requirement for trader to enter commodity code if goods are Standard 

10.2 EIDR NOP (C21 EIDR) datasetÌýÌý

Purpose: a reduced dataset available for simplified processes as an Arrived (J), Pre-Lodged (K) declaration for traders with either UKIMS-EIDR or SCDP-EIDR. Trader can submit a J and K declaration followed by an IMMI as a supplementary.Ìý

Requirements are: 

• trader must have EIDR or UKIMS-EIDR authorisationÌýÌý
• trader must be UKIMS authorisedÌýÌý
• goods must be in free circulation and home use prior to their movementÌýÌý
• goods must be directly transported into Northern Ireland 
• goods must be released to free circulation in Northern IrelandÌýÌý
• goods must be ‘not at risk’ of onward movement to the EU 

Benefits are: 

• trader can declare the IMMI as a supplementary declarationÌýÌý
• smaller dataset than the IMMIÌýÌý
• trader not required to enter commodity codeÌýÌý
• traders that apply for UKIMS will also be able to apply for UKIMS-EIDR, allowing traders to submit an EIDR NOP followed by an IMMI declaration if their movements are moving Great Britain-Northern Ireland ‘not at risk’ via direct transport

10.3 C21i datasetÌýÌý

Purpose: a reduced dataset available for simplified processes as an Arrived (J), Pre-Lodged (K) declaration for traders submitting a Customs Clearance Request (CCR).ÌýÌý

Requirements are: 

• trader must be UKIMS authorisedÌýÌý
• goods must be in free circulation and home use in Great Britain prior to their movementÌýÌý
• goods must be ‘not at risk’ of onward movement to the EUÌýÌý
• goods must be released to free circulation in Northern Ireland 

Benefits are: 

• smaller dataset than the C21iÌýÌý
• allows trader to release goods placed under Transit procedures (including TIR Carnets) where the inventory system requires customs clearance to release the goodsÌýÌý
• allows traders to release goods placed under Movements in Temporary Storage (MiTS) to move to another temporary storage premises also located in NI

11. Annex 2: Great Britain to Northern Ireland simplified process for Internal Market Movement InformationÌýÌý

11.1 DE No. 1/1 Data Element (DE) name: Declaration typeÌýÌý

Condition – the declaration type must be IM in all instances.Ìý

11.2 DE No. 1/2 DE name: Additional Declaration typeÌýÌý

Conditions are: 

• for an IMMI declaration, this may be A, D, Y or ZÌýÌý
• for type Y and Z supplementary declarations certain data elements will have different completion instructions or will not be requiredÌýÌý
• if UKIMS-EIDR is being used, the declaration would be completed exactly as if it was normal EIDR with regards to Document code/authorisation category

11.3 DE No. 1/10 DE name: Procedure codeÌýÌý

Condition – one of the following Procedure Codes (PCs): 0700, 0751, 0771, 0778, 4000, 4051, 4071, 4078 must be declared.Ìý

11.4 DE No. 1/11 DE name: Additional Procedure codeÌýÌý

Conditions are: 

• additional Procedure Codes must include at least one of the following – 1SG or 1LG or 1EL or 1ENÌýÌý
• all goods items on the declaration must use one of these 4 APCs 

11.5 DE No. 2/1 DE name: Previous Document (Impacted by ‘Banned Code’ list) 

Conditions are: 

• if a supplementary declaration under UKIMS EIDR is being entered it would require a declaration unique consignment reference (DUCR) to be entered as per normal EIDRÌýÌý
• where aggregated or recapitulative supplementary declaration is used there will be specific completion instructions for this DE 

11.6 DE No. 2/2 DE name: Additional Information (Impacted by ‘Banned Code’ list)ÌýÌý

Conditions are: 

• NIDOM must be declared in all instancesÌýÌý
• NIREM must be declared unless NIAPP is enteredÌýÌý
• where aggregated or recapitulative supp dec is used there will be specific completion instructions for this DEÌýÌý
• AI code AGGSD or RSDSD must be entered in all instances depending on if aggregation (1AG) or recapitulation are used (1RD)ÌýÌý
• GVMS and non-GVMS shipments may be combined on a single aggregated supplementary declarationÌýÌý
• AI code RRS01 should not be declared in DE2/2 

11.7 DE No. 2/3 DE name: Documents produced, certificates and authorisations, additional references (Impacted by ‘Banned Code’ list)ÌýÌý

Conditions are: 

• document code 1UKI and the UK Internal Market Scheme (UKIMS) authorisation number must be declared unless NIAPP is enteredÌýÌý
• at least one Document Code and a Status Code from the following list must also be provided to evidence the direct transport of the goods from Great Britain to NI: N703, N704, N705, N710, N714, N720, N722, N730, N740, N741, N750, N760, N785, N787, N820, N821, N933 

11.8 DE No. 3/1 DE name: ExporterÌýÌý

Condition – if a recognised Great Britain or XI EORI is held it must be declared in DE 3/2.Ìý

11.9 DE No. 3/2 DE name: Exporter Identification NumberÌýÌý

Condition – DE 3/1 must be left blank where a Great Britain or XI EORI is provided in DE 3/2.Ìý

11.10 DE No. 3/‌‌‌15 DE name: Importer Name and AddressÌýÌý

Conditions are: 

• if DE 3/‌‌‌16 is XI EORI, leave DE 3/‌‌‌15 blankÌýÌý

• if DE 3/‌‌‌16 is Great Britain EORI or blank, enter name and address in DE 3/‌‌‌15 

11.11 DE No. 3/‌‌‌16 DE name Importer Identification NumberÌýÌý

Conditions – must always be the Great Britain or XI EORI of the UKIMS authorisation holder (unless NIAPP is used): 

• if XI EORI is declared in DE 3/‌‌‌16, DE 3/‌‌‌15 must not be completedÌýÌý
• if Great Britain EORI is being used, DE 3/‌‌‌15 must be completed with importer name and address 

11.12 DE No. 3/‌‌‌18 DE name Declarant Identification NumberÌýÌý

Condition – declarant Great Britain or XI EORI must be declared in all instances.Ìý

11.13 DE No. 3/‌‌‌20 DE name Representative Identification ÌýÌý

Condition – rules around establishment in Northern Ireland and the use of Great Britain EORIs.Ìý

11.14 DE No. 3/‌‌‌21 DE name Representative Status CodeÌýÌý

Condition – rules around establishment in Northern Ireland linked to representation.Ìý

11.15 DE No. 3/39 DE name: Holder of the Authorisation Identification Number (Impacted by ‘Banned Code’ list)ÌýÌý

Condition – Authorisation Type Code UKIM in addition to the EORI of the UKIMS authorisation holder must be declared unless NIAPP is entered.Ìý

11.16 DE No. 3/40 DE name: Additional Fiscal References Identification Number 

Condition – this data element is mandatory when A04 or 1VW are declared on an H8 in DE 1/11 on at least one goods item. This data element may not be used in any other circumstances.Ìý

11.17 DE No. 4/‌‌‌14 DE name: Item amount invoicedÌýÌý

Condition – enter the ‘item amount invoiced’ for the goods item and the currency used to invoice the goods. Normal rules around valuation methods and other additional documents do not apply.Ìý

11.18 DE No. 5/8 DE name: Country of destination codeÌýÌý

Condition – enter code Great Britain in DE 5/8 in all instances.Ìý

11.19 DE No. 5/‌‌‌15 DE name: Country of originÌýÌý

Conditions are: 

• enter the code for the country of origin of the goods from the list of codes (as determined by Article 60(2) of the Code)ÌýÌý

• rules around DE 5/‌‌‌15 in relation to DE 5/‌‌‌16 do not apply 

11.20 DE No. 5/‌‌‌23 DE name: Location of goodsÌýÌý

Conditions are: 

• the location code declared must always be in Northern Ireland and must use the country code of Great BritainÌýÌý

• on supplementary declarations enter code ‘GBBYUKIM’ followed by the UKIM authorisation number in DE 5/‌‌‌23 in all instances 

11.21 DE No. 5/‌‌‌27 DE name: Supervising Customs OfficeÌýÌý

Condition – declare Supervising Office code ‘GBBEL004’ in all instances unless PC 4000 is declared in DE 1/10.Ìý

11.22 DE No. 6/‌‌‌1 DE name: Net MassÌýÌý

Condition – this DE is mandatory when Additional Procedure Codes (APC) 1EL or 1LG are declared in DE 1/11, with the exception of where APC 1EL or 1LG are declared on a supplementary declaration. In all other instances DE 6/1 may be left blank.Ìý

11.23 DE No. 6/‌‌‌2 DE name: Supplementary UnitsÌýÌý

Conditions are: 

• this DE is mandatory on a Type A or D declaration when APC 1EL or 1LG are used and all the commodity codes covered by the 8-digit commodity code require a supplementary unitÌýÌý
• this DE is not required on a supplementary declaration 

11.24 DE No. 6/5 DE name: Gross MassÌýÌý

Condition – enter the gross mass, expressed in kilograms, for the goods being declared.Ìý

11.25 DE No. 6/8 DE name: Description of goodsÌýÌý

Condition – enter a description of the goods which is specific enough to allow the unambiguous identification, classification and examination of goods.Ìý

11.26 DE No. 6/10 DE name: Number of PackagesÌýÌý

Condition – enter the number of packages making up the consignment covered by the declaration.Ìý

11.27 DE No. 6/‌‌‌14 DE name: Commodity CodeÌýÌý

Conditions – enter the commodity code corresponding to the relevant goods item to the required number of digits according to the APC being used: 

• APCs – 1SG 6-digits requiredÌýÌý
• APCs – 1EL, 1EN or 1LG 8-digits required 

11.28 DE No. 7/4 DE name: Mode of Transport at the BorderÌýÌý

Conditions are: 

• enter the relevant code‌‌‌ from‌‌‌ 1-‌‌‌9 to indicate the active means of transport used to arrive at the Northern Ireland external borderÌýÌý

• for aggregated and recapitulative declarations, enter code ‘9’ in all instances, irrespective of the Mode of Transport used to release the goods on arrival in NI